TRIBALOY T-800 Nickel Cobalt Alloy High Temperature Wear Abrasion
TRIBALOY T-800 was designed to resist high temperature wear and
abrasion. It has exceptional
oxidation and corrosion resistance due to its high Cr content.
T-800 is harder and has better
abrasive wear resistance than Tribaloy T-400.
NOTE: Wear resistance of Tribaloy alloys is highly dependent on the
volume percentage of Laves phase. Therefore, test results vary
significantly with dilution and cooling rate and other thermal
history. Should be considered for valve trim, mechanical seals and
T-800 shows excellent corrosion resistance in Acetic Acid
(concentration 50%, boiling) and in
Phosphoric Acid (concentration 85%, 66°C). Also in Sulphuric Acid
(concentration 5%, 66°C)
excellent corrosion resistance has been observed
NOMINAL CHEMICAL COMPOSITION (MASS%)
|T-800||Bal.||17.5||28.5||0.1 max||3.5||Ni, Fe|
Please contact XUNSHI for your requirement details.